Posts Tagged 'felt'

Accessorize – Baby Felt Bow Headband Tutorial

Whew!  It has been such a fun and full week!  My lovely parents came to visit all the way from Utah and left today, many tears were shed 😦  While they were here I worked with my Mom pumping out tons of goodies for my only sister who is due with her first baby girl this winter.  One thing that is a must in my book is little bows 🙂  Really helps with the “Oh my, what a darling little boy” comments.  It also helps to dress up any outfit!  I love the look and feel of felt for these headbands.  I decided to write up a tutorial on the process!  Enjoy!  **Tutorial is for personal use only.  If blogged about, I would appreciate a shout out and possibly a link back here to the tutorial.  Thanks!

*If you don’t have the resources or time to make your own bows but need to get your hot little hands on a sweet everyday set, I have listed a classic colors set of 6 in my shop.

Supplies:

-felt (wool blend used) *Joann fabrics carries basic colors and Etsy is another great place to find wool blend and pure wool felts

waxed beading thread.  This thread is thick like dental floss (you could use dental floss in a bind).  It is very strong and ideal for making bows and hair accessories.  I found mine at Walmart in the beading aisle. Linked up to Amazon.

printable template PDF (please do not redistribute or copy, my own personal design)

-fabric scissors

-needle

-elastic (double fold used).  Find it here or here.

 

Step 1.

Cut felt pieces according to template.  Cut elastic.  Typically newborn babies head’s measure approx. 12.5″-13″, so cut elastic at 13.5″.  If making for older baby or child, measure their head first.  Add 1″ to the measurement to account for overlap.  Now is a good time to thread your needle.  Cut a long piece of beading thread and double it up knotting the ends together.

 

Step 2.

Fold 5″ piece of felt overlapping ends by about 1/2″ on each end as pictured.

Step 3.

Place folded felt piece on top of 3″ felt piece, centering it.  Set aside.

Step 4.

Making sure elastic isn’t twisted, overlap ends about 1/2″ on each end and hold in place.

Step 5.

Place felt pieces directly over the folded portion of the elastic, center the elastic in back of felt.  Hold with one hand in place.

Step 6.

With the knot starting on the top edge of the bow, make a running stitch (large stitch) and end with the thread on the upper side.

Step 7.

Pulling on thread, bunch up felt so that it creases along stitches.  Hold tight and begin wrapping thread around bow center tightly about 5-6 times (7a).  Turn over bow to back and run needle underneath wrapped thread.  This will create a loop with thread.  Send needle through the loop 3 times.  Pull needle slowly and create a tight knot at the base of bow. (7b)

Step 8.

Place a dab of glue (hot glue used) in front center of bow.  Adhere 1/2″ piece of felt to the glue, centered.

Step 9.

Glue down each end of the 1/2″ piece of felt around the back of the bow.  Trim ends if necessary if they are too long.

Step 10.

Trim the bottom 1″ layer of felt ends into v-shapes.  Try to keep them further out than the bow for the best look.

Step 11.

Use fray check on elastic ends to keep them from fraying or unraveling.  You are done!  YAY!

Now that’s a cute baby head! 🙂

I would love to see bows you make!  Come and enter them into the Flickr group!   

P.S. The boots my baby are modeling are made using my Ruffled Boots Pattern available in my shop!

 

 

 

 

 


Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 2,534 other followers

My Pinterest

Follow Me on Pinterest

Instagram

View My Gallery

My Flickr

do.GOOD stitches charity bee

Portland Modern Quilting Guild

The Vintage Sheet Blog

I Love Vintage Crafts

DanielleThompson

Small Style